Just disconnect all hardware to the motherboard. This is to try and see which hardware doesn't pass the BIOS test.
CPU LED ON INSTALL
If it does then install the GPU and monitor and keyboard and mouse and see if you get Video Output. Now install one RAM Stick and see if the DRAM Trouble LED light goes off and the GPU light goes on. If it still stops on the CPU Trouble LED Light with just the CPU installed then you either have a defective CPU or Motherboard. If it does, at least that indicates your CPU is good and passed the BIOS test and found no RAM installed so it lit up the DRAM Trouble LED light. Power up and see if the CPU Trouble LED light goes off and the DRAM Trouble LED light goes on. Just leave the CPU installed and no other hardware. If doesn't and you still get the CPU Trouble LED light on your motherboard, remove all the connected hardware to the motherboard including GPU and Keyboard and mice. Remove all the RAM sticks except one and see if you get Video output when you power up.
Is there anything that I can try to fix this ?
Sadly I don’t have any spare atm and I cant go to a shop So I think what is left is only trying another motherboard or CPU removed everything on the motherboard except CPU Reseat CPU and reapply the cooler and paste reset cmos (by removing the battery and waiting few hours, )
CPU LED ON UPDATE
try different bios update by flashing my motherboard use different rams ( my old ones HyperX Kingston Fury 2666MHz DDR4) put rams in different slots, use single or double rams
CPU LED ON PRO
Rams CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 My motherboard has in Ez debug LED it was shining on Dram then after updating my bios to latest version only CPU LED was on
CPU LED ON PC
I updated my old pc all component except GPU -thanks market – and hdd and ssdĪt first it worked fine, I then increased the rams speed to its advertised speed (3200), it worked fine after a while my pc was restarting randomly, I decreased the ram speed to 3032, it restarted and worked fine after a while it shut down and now when I turn on the pc it powers up (fan spinning, rams shinning) but there is no display or my mouse doesn’t work, however, my keyboards keys light is on. Thank you for any help or advice you can offer.I have an issue, when I turn on the pc it powers up (fan spinning, rams shinning) but there is no display or my mouse doesn’t work, however, my keyboards keys light is on Really I just want to know if this sounds like a CPU, or MOBO issue so I know which part more likely needs to be replaced. At this point I am at a complete lost and have no more hope. So I then reinstalled the 5600x into the motherboard to see if simply reseating it would do the trick, but this time I am getting no post at all plus the CPU led and reposition the ram has done nothing to make it post like before. After googling this issue some more I decided to remove my 5600x from the motherboard to see if any of the pins were damaged during the installation of the new cooler, which I didn’t see any that were damaged. After pressing the restart button everything run smoothly but after some hours using my pc I have the same issue (my cpu is working on base clock) Amd ryzen 5 2600. I then proceeded to switch the ram sticks around every and any way possible and got a post in ever orientation except for duel channel. hello guys, while i am using my pc the screen turns black and the red cpu led is working. Once I went to post I was met with the CPU led lit and no post, so I after googling a solution I removed one stick of ram and tried starting my PC again, and this time it posted.
I finally received the cooler today and installed it.
Originally I was using the stock AMD cooler on my 5600x while waiting for my delayed package (the be quiet pure rock 2). I built my PC about a month ago now, (B550 MSI Tomahawk + Ryzen 5 5600x + EVGA 3070ti + Trident Z 32GB 3600Mhz) and it has been working wonderfully until now.
0 kommentar(er)
